Tray Sealer Machine VOLVAC E26
The outer mold and mechanical parts are completely made of stainless steel materials. The electrical, pneumatic and other technical materials required for the machine have been meticulously selected and used. Ready containers filled with the products to be packed are placed on the table of the machine. For safety reasons, the start buttons on the front of the machine are pressed with both hands and the packaging process starts automatically as the table moves to the inside position. Depending on the selected packaging program, protective gas is supplied to the product package after the vacuum process of the packages in atmospheric environment. Then, the upper film, which is ready at the top of the packages, is sealed with the resistance jaws and cut from the edges of the packages with a cutting apparatus. After the table comes back to its exit position, the edge wastes of the upper film are wrapped in the waste wrapping roll located at the back of the machine. After this last step, the machine is prepared again for the next operation.
Vacuuming and packaging food products with protective food gases in VOLVAC E26 model box sealing machines not only provides a long shelf life to the products, but also preserves the quality and nutritional values of the products. It prevents the deterioration of food products such as all kinds of fresh and processed meat, fish, other seafood, dairy products, fresh and dried vegetables, fruits, snacks and nuts in a short time, and reduces wastage.
|Machine Dimensions||1000 x 750 x 750 h mm|
|Chamber Sizes||380 x 280 h mm|
|cycle||3 - 10 cycle/minute|
|Product Capacity||360 packs/hour - 1.200 packs/hour|
|Pomp Capacity||21 m³/h|
|Pneumatic Feeding||16 NI 6-8 bar|
|Outer Body||stainless steel AISI304|